A2D Solutions - TVProRacks : DDB Unlimited : DDB Unlimited OD-50DDXC

DDB Unlimited OD-50DDXC

Outdoor Enclosures / Cabinets

DDB Unlimited

The OD-50DD is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The OD-50DD offers the protection needed for any severe outdoor environment. The OD-50DD is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration. Ultimate security is provided by a three point locking system, which utilizes a NEMA stainless steel cabinets, the OD-50DD, made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the OD-50DD is the ultimate solution.

Alumishield	Top cover, shadescabinet from the sun
Handles	Stainless steel - NEMA
Rails	Fully adjustable &alodine coated
Doors	Front and rear securedwith three point locks and padlocking handles
Vents	Front & rear, top& bottom, filters supplied

Top Of Page

Specifications

General

Weight

150 lbs. assembled
205 Lbs. Shipping weight

Doors

Two - secured by three pointlocking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets

Material

.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous

Vents

30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover

Handles

Stainless steel

Exterior Screws

Stainless steelwith NEMA washers & nylon locking nuts

Racking Specifications

Rails

Two standard (For additionalrails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX)

Spacing

19" EIA STANDARD

Positioning

All rails fully adjustablefrom front to rear

Useable Height

50 inches

Useable Depth

Maximum: 30 1/2" Minimum: 28 3/4" (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	46.75" - 50.00"	3.25"	30.50"
	46.57" - 46.75"	.18"	29.50"
	31.00"- 46.57"	15.57"	30.50"

Center	19.00"-31.00"	12.00"	28.75"

	3.43" - 19.00"	15.57"	30.50"
	3.25" - 3.43"	.18"	29.50"
Bottom	0.00" - 3.25"	3.25"	30.50"