A2D Solutions - TVProRacks : DDB Unlimited : DDB Unlimited OD-62DX

DDB Unlimited OD-62DX

Indoor / Outdoor Cabinets

DDB Unlimited

The OD-62DX is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The OD-62DX offers the protection needed for any severe outdoor environment. The OD-62DX is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration.

Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel handles, the OD-62DX, made of ALUMIFLEX, will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the OD-62DX is the ultimate solution.

Alumishield	Top cover, shadescabinet from the sun
Handles	Stainless steel - NEMA
Rails	Fully adjustable &alodine coated
Doors	Front and rear securedwith three point locks and padlocking handles
Vents	Front & rear, top& bottom, filters supplied

Top Of Page

Specifications

General

Weight

140 lbs. assembled

Doors

Two - secured by three pointlocking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets

Material

.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous

Vents

30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover

Handles

Stainless steel

Exterior Screws

Stainless withNEMA washers & nylon locking nuts

Racking Specifications

Rails

Two standard (For additionalrails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX)

Spacing

19" EIA STANDARD

Positioning

All rails fully adjustablefrom front to rear

Useable Height

62 inches

Useable Depth

Maximum: 21 1/2" Minimum: 19 3/4" (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	58.75" - 62.00"	3.25"	21.50"
	58.57" - 58.75"	.18"	20.50"
	37.00" - 58.57"	21.57	21.50"

Center	19.00"-31.00"	12.00"	19.75"

	3.43" - 25.00"	21.57	21.50"
	3.25" - 3.43"	.18"	20.50"
Bottom	0.00" - 3.25"	3.25"	21.50"