A2D Solutions - TVProRacks : DDB Unlimited : DDB Unlimited OD-78DD

DDB Unlimited OD-78DD

Indoor / Outdoor Cabinets

DDB Unlimited

The OD-78DD is the superior design in communication cabinets, being as rigid as steel & yet noticeably lighter than the old heavy steel constructed cabinets. This is made possible with our own aluminum recipe called ALUMIFLEX. The OD-78DD offers the protection needed for any severe outdoor environment. The OD-78DD is constructed of .125 ALUMIFLEX material, & comes with an additional .125 ALUMISHIELD top cover, thereby fully protecting your equipment from falling ice and the sun's heat penetration.

Ultimate security is provided by a three point locking system, which utilizes NEMA stainless steel handles. The OD-78DD made of ALUMIFLEX will operate without affecting, or being effected by, RF influences. Outdoor cabinets are becoming the alternative shelter solution for today's complicated zoning requirements. So whether you're installing a new shelter or adding room to your existing one, the OD-78DD is the ultimate solution.

Alumishield Top cover, shadescabinet from the sun
Handles Stainless steel - NEMA
Rails Fully adjustable &alodine coated
Doors Front and rear securedwith three point locks and padlocking handles
Vents Front & rear, top& bottom, filters supplied

Top Of Page

Specifications

General

Weight

205 lbs. assembled
260 lbs. Shipping weight

Doors

Two - secured by three pointlocking system
Locks via customer supplied padlocks
sealed with 13/16" aluminum filled gaskets

Material

.125 ALUMIFLEX
Finish: Flat aluminum
RF properties: Non-ferrous

Vents

30 bottom louvers per door
Twelve top louvers - In top cover-under ALUMISHIELD
One removable filter panel per door
Twelve fixed filter pads in top cover

Handles

Stainless steel

Exterior Screws

Stainless steelwith NEMA washers & nylon locking nuts

Racking Specifications

Rails

Two standard (For additionalrails see accessories)
Alodine coated
Holes tapped to 10 x 32 threads
Each rail supported by three R-STRUTS
.125 material (ALUMIFLEX)

Spacing

19" EIA STANDARD

Positioning

All rails fully adjustablefrom front to rear

Useable Height

78 inches

Useable Depth

Maximum:30.50"Minimum 28.75" (See below)

	*Section Starting & Ending Points	Vertical Height Per section	Effective Depth For Each Section
Top	74.75" - 78.00"	3.25"	30.50"
	74.57" - 74.75"	.18"	29.50"
	45.00" - 74.57"	29.57"	30.50"

Center	33.00" - 45.00"	12.00"	28.75"

	3.43" - 33.00"	29.57"	30.50"
	3.25" - 3.43"	.18"	29.50"
Bottom	0.00" - 3.25"	3.25"	30.50"